Products

Tensile Tester Horizontal

Product line: S81502

For an accurate and fast measurement of all parameters with dry and wet samples of paper, board and tissue. FRANK-PTI’s horizontal tensile tester is one of the leading products of its kind. Its ergonomic design with touchscreen simplifies operation and reduces the testing time. The robust and reinforced construction helps to avoid falsifying influences like vibrations etc. This makes the results reliable even if measurements are repeated or done simultaneously. These optional features are available: tub for strength measurements with wet samples and a calibration device for performing self-tests of the load cell.


Test description
The measurement starts immediately because of the preinstalled measurement programs. Select a test method and insert the sample support into the automatic sample clamps. Now the tester checks all the various sample parameters and determines whether the sample is an MD or CD strip. The tester identifies the test strip automatically when the sample is inserted. It starts the tensile test and completes it when the sample breaks. The sample clamps return to their initial position. The measurement results are displayed on the touchscreen. Another practical feature is: If you did various tests in MD and CD, you can compare the results in the statistics and display the ratios. It is possible to delete single measurements from the statistics.
Applicable standards
  • DIN ISO 1924-3 / ISO 1924-2 / EN 12625-4 I -5 / Tappi T456 I T494
Features
  • Plug and Play
  • Automatic ratio calculation
  • Automated sample identification
  • Pneumatic sample clamping
  • Graphs showing the measuring process
Spezifikation
  • Easy operation via integrated touch screen
  • 5 preset testing programs and applicable sample supports
  • Test strips distinguishable into test series (e.g. MD/CD)
  • Automatic ratio calculation (MD/CD)
  • Pneumatic sample clamps and automatic sample detection
  • Additional start button - for transparent samples
  • Sample width: 15, 25 and 50 mm
  • Sample support prevent the sample from sagging
  • Test speed adjustable between 1 and 600 mm/min
  • Available force sensors: 100-500N
  • Automatic clamp return after test
  • FRANK-PTI standard connections
  • Compatible with ProbeNet
  • Also as ModularLine version available
  • Optionally available:
    – Wet tensile test
    – Calibration tool
Available Models
  • S815020000 Horizontal tensile tester
  • S815020001 Horizontal tensile tester - with wet tensile
  • S815020002 Horizontal tensile tester - with wet tensile, 50mm sample length
Mandatory:
  • S815021010 Kraftmesszelle 100N
  • S815021011 Kraftmesszelle 200N
  • S815021012 Kraftmesszelle 500N
Available Accessories
  • S815021001 Calibration device without weight
  • S815021013 Weight set with T-beams
  • S406900001 ProbeNet software with on device license
    *further requirements explained on request
Technical data
  • Power supply: 100-240V 50/60Hz /150W max
  • Compressed air connection: 4-6bar / 6mm
  • Water connection: no
Data
  • RS232 data output
  • USB Updates / Service
  • Ethernet data output / MQTT
  • Paralell port printer
Measurement
  • Units:
  • Maximum Force [N]
  • Breaking time [sec.]
  • LB-breaking length [km]
  • S-width-related breaking strength [N/m]
  • I-breaking strength index (ten. strength index) [Nm/g]
  • Z-work capacity (tensile energy absorption) [J/m²]
  • Iz-work capacity index (ten. en. ab. Index) [J/g]
  • Change in length (Elongation) [mm]
  • Tensile strength [KN/m N/m]
  • Tensile stiffness [KN/m]
  • Tensile Stiffness index [MNm/KG]
  • Stretch at break [breaking elongation] [%]
  • Wet tensile strength [%]
  • Relative wet tensile strength [%]
  • and much more
    *displayed values vary depending on chosen method and standard.
  • Statistics: Min./max./standard dev. / var. coeff.
  • Accuracy: +- 1%
  • Test speed: 0,1-600mm/min
  • Max. sample stroke: 300mm
  • Max. drive way: 160mm
  • Nominal load: 10-500N (depending on load cell)
  • Force resolution: 0,01N

Device Dimensions
  • S815020000 Tensile Tester horiz. 570 x 520 x 240 mm (L x B x H)
Weight/ Version / netto / brutto
  • S185200000 / Tensile Tester horiz. / 38kg / approx. 50kg

Privacy settings

You can adjust the settings for the cookies here.

Please select which cookies you would like to accept and confirm by clicking the button. You will then be redirected back to the start page.

*Please note that if you check the External media (Google Maps and YouTube) box, data such as your IP address bay be transmitted to Google and thus possibly to a third country without a data protection agreement. This happens especially when you use Google Maps on the site or watch our videos at the products. You can find more information here: Privacy Policy

Country representations, regarding contacts and videos are displayed only if you have checked External media.