Products

Sheet Former Rapid Köthen automatic

Product line: S95854

For the production of standardized hand sheets with a diameter of 200 mm.The warp resistant stainless steel frame is a robust base for the work table, in which one pump, hot baths, the control unit, a return water filter and the water container are installed. A former column, dryers, the water circulation system, and the controls are mounted in the waterproof table surface. The control panel contains easy to read instruments and a timer for each dryer as well as a vacuum display. Different programs can be saved in the program control system and can be reloaded at any time. Between the former column and dryers there is a spacious workspace for removing the manufactured hand sheets and preparing them for drying.

Test description

From the equalizer, suspension is taken. Water is introduced to the former column automatically when the start button is pressed. When it has been filled to the 4 litre mark, the suspension is added. When the 7 litre mark is reached the flow of water is stopped automatically. After the agitation is completed, the suspension comes to rest and is drained through a screen. The hand sheet is left on the screen frame. To provide it with the desired stability it is briefly treated with vacuum. Then the former column is opened, the hand sheet covered with a carrier board and couched. After removal it is given a cover sheet and put into the dryer. There the sheet is dried for the preset time (5 – 6 mins). After the drying is complete, carrier board and cover sheet are removed. The sample can then be made ready for further tests.

Applicable Standards

DIN EN ISO 5269-2 / DIN 54358 / Zellcheming Merkblatt V/8/76
*more on request

Features

Table frame made of sturdy stainless steel (powder-coated)
Bench top made entirely of waterproofed polypropylene
Lightweight dryers for easy usage
Special place on the bench top for detaching the produced sheets
Automatic sheet forming process, changeable to manual control anytime
Start of the sheet forming and drying process by push of button
With 1 – 3 dryers: one heating bath, 4-5 dryers: two heating baths

Specification

Vacuum pump made of tin bronze
All parts made of corrosion- resistant materials
Automatic and manual mode
Automatic controll system: up to 24 storable programs
Water circulation inside the dryers acc. to standard (3-6 l/min)
Available with up to 5 dryers
Dryer temperatur: 93-97°C
1-3 dryers: 1 built-in water heater
4-5 dryers: 2 built-in water heaters
Optional: Dryer temperature up to 135°C (with special heat transfer liquid)
Working hight: min 150 cm
Table hight: appx. 87 cm (adjustable feet)

Available Models

S958540006 RK0A - Rapid Köthen auto. without dryer
S958540007 RK1A - Rapid Köthen auto. 1 dryer
S958540008 RK2A - Rapid Köthen auto. 2 dryers
S958540009 RK3A - Rapid Köthen auto. 3 dryers
S958540010 RK4A - Rapid Köthen auto. 4 dryers
S958540011 RK5A - Rapid Köthen auto. 5 dryers

Available Accessories

S958541014 RK Cover sheets 205mm Ø. (standard)
S958541021 RK Cover sheets 220mm Ø
S958541013 Carrier boards 240 mm Ø 1 pack a 1000 sheets
S958541003 Couch roll
S958541118 Knock off plate silicone 40x40 / 5mm
S958541007 Screen mounting device

Technical Data

Power supply: 400 V / 3Ph / 6kW
Water connection: Supplied pressure min. 2,5 bar /max 5 bar
(hose with ¾” screwing)
Drain: 50mm Ø (pipe connection)
Compressed air: 6 bar (hose 8mm 3m)