Products

Concora Medium Fluter

Product line: S95963

The Concora medium fluter consists of a main case and a fluter case. The motor and controls are installed in the main case. Behind the safety cover of the fluter are the geared elements and heating elements. On its top there is a slot for insertion of samples. The thermostat, mounted in the main case, regulates and displays the fluter segments temperature. The standard unit is delivered with integrated geared segments for one flute. For other flute types, the Concora medium fluter with exchangeable flute segments is available. The corresponding “third hand” and tamping block are used for adhesively attaching the previously created flute.


Test Description
A 152.4 x 12.7 mm test strip is created with the strip punch (see page 9) and fed into the sample slot that leads to the fluter which has been preheated to operating temperature. On pushing the start button geared segments pull the stripthrough the machine and press it with a defined force and preset temperature, creating flutes in the strip. After flute creation, it is delivered to a compartment for removal by the operator. It can now be used for a CCT test or prepared for the CMT test using the “third hand”. In this process the flute is placed of the flute block and the third hand is closed. An adhesive tape acc. to standard is then applied to the flute, and the tamping block is used to firmly attach it. At this point the flute block is pushed sidewards and the tape is removed.
Applicable Standards
  • DIN EN ISO 7263
  • TAPPI T 809
  • SCAN P 27
  • PAPTAC D 29
  • APPITA/AS 1301.434s
Features
  • Digital display of the temperature
  • Fast heating of the fluting segments (approx.10 min)
  • Energy optimized: only 450W power consumption
  • Low heat emissions, operation in climatised laboratories possible
Specification
  • Digital temperature display
  • Temperature adjustable up to 200 C°
  • Fast heating of the fluting segments
  • Speed of the fluting segments: 4,5 UpM
  • Contact pressure: 100 N
  • Fluting segments for A, B, C, D, E & F flutes
  • „Third hand“ and tamping block
Available Models
  • S959630003 Concora with changable segments A-F 2 Slots 12,7mm / 15mm (GHOST)

  • S959631001 A-Flute Segments
  • S959631002 B-Flute Segments
  • S959631003 C-Flute Segments
  • S959631004 D-Flute Segments
  • S959631005 E-Flute Segments
  • S959631006 F-Flute Segments
    *more on requests
Available Accessories
  • S959631007 3.Hand for A-Flute
  • S959631014 3.Hand for B-Flute
  • S959631013 3.Hand for C-Flute
  • S959631016 3.Hand for E-Flute
  • S959631008 Adhesive tape double sided, 19 mm
  • S959631008 Adhesive tape one sided, 19 mm
  • S403100016 Sample Punch - Punch & Die 6" x 0,5" (152.4 x 12.7 mm)

Technical data
  • Power supply: 100-240V 50/60Hz
  • Compressed air connection: no
  • Water connection: no
System
  • Contact pressure: 100N
  • Speed: 4,5 UpM
  • Temperature: adjustable up to 200C°+-8C°
Device Dimensions
  • S959630002/3 Concora 480 x 200 x 320 mm (L x B x H)
Weight / Version / net / gross
  • S959630002/3 Concora / ~20 kg / ~42 kg

Privacy settings

You can adjust the settings for the cookies here.

Please select which cookies you would like to accept and confirm by clicking the button. You will then be redirected back to the start page.

*Please note that if you check the External media (Google Maps and YouTube) box, data such as your IP address bay be transmitted to Google and thus possibly to a third country without a data protection agreement. This happens especially when you use Google Maps on the site or watch our videos at the products. You can find more information here: Privacy Policy

Country representations, regarding contacts and videos are displayed only if you have checked External media.