Internal Bond Tester

Product line: S40530

For the determination of the internal bond strength of paper and board. The Internal Bond Tester is used to determine the internal bond of paper and board. A pendulum strikes a prepared specimen which splits the sample under controlled conditions. The Internal Bond Tester complies with state-of-the-art technology and convinces with an easy-to-use touchscreen display, a fully automated pendulum return and the possibility of changing the various pendulums very easily. The large touchscreen display shows a wellstructured representation of individual values and statistics (maximum, minimum and average values and standard deviations) and, in addition, is compatible with ProbeNet.

Test description
After placing the prepared test sample into the device, the pendulum is released. The pendulum hits the test sample and splits the paper in the zaxis. The forces that are generated during the test are measured and can be displayed in various units. The pendulum is automatically returned to its initial position and is ready for another measurement. The results of a measurement series are recorded in the statistics.
Applicable standards
  • ISO 16260
  • Integrated digital display
  • Easy placement of the angle supports
  • Automatic pendulum return
  • Different pendulums available
  • Integrated digital display
  • Five sample supports and aluminum angles in scope of delivery
  • Easy inserting of the prepared supports with angles
  • Automatic pendulum return
  • Display of the values in ft-lb/in2, J/m² or kg/cm
  • Compatible with ProbeNet
  • Available pendulums:
    - Low range (100-600 J/m²)
    - High range (200-1200 J/m²)
    - Special range (300-2400 J/m²)
Available Models
  • S40530000 Internal Bond Tester
mandatory: 1 pendulum
  • S405301012 Low Range I pendulum 100- 600 J/m²
  • S405301013 High Range II pendulum 200-1200 J/m²
  • S405301014 High Range III pendulum 300-2400 J/m²
Available Accessories
  • S405301005 IBT Sample Preparation Station
  • S405301009 Spare Angles 5pcs (standard)
  • S405301019 Sample support L83mm (5 pcs) type FRANK
  • S405301015 Double-sided adhesive tape 410M 25mm (standard)
  • S405301017 Double-sided adhesive tape 25mm (high adhesion)
  • S406900001 ProbeNet software with one device license
    *requirements explained on request
Technical data
  • Power supply: 100-240V 50/60Hz
  • Power consumption: <20W
  • Water connection: no
  • Compressed air connection: 4-6 bar / 6mm
  • RS232 data output
  • USB Updates / Service
  • Ethernet data output / MQTT
  • Measuring range: Depending on the pendulum
  • recommended:
    LR 130-500 J/m²
    HR 230-1000 J/m²
  • Measuring accuracy +- 3%
  • Units: Ft-lb/in²; J/m²; kg force/in²
Device dimensions
  • S405300000 / IBT / 230 x 530 x 520 mm (L x B x H)
Weight / Version / net / gross
  • S405300000 / IBT / approx. 28 kg / approx. 45 kg

Privacy settings

You can adjust the settings for the cookies here.

Please select which cookies you would like to accept and confirm by clicking the button. You will then be redirected back to the start page.

*Please note that if you check the External media (Google Maps and YouTube) box, data such as your IP address bay be transmitted to Google and thus possibly to a third country without a data protection agreement. This happens especially when you use Google Maps on the site or watch our videos at the products. You can find more information here: Privacy Policy

Country representations, regarding contacts and videos are displayed only if you have checked External media.