Products

Universal Micrometer

Product line: S16502

For the precise determination of thickness of paper, board, corrugated board, nonwovens, foil and textile. The universal micrometer consists of a warpresistant housing, which ensures exact measurements thanks to its stability. On the front of the device there is a digital display and controls, as well as start and stop buttons. The high-precision measurement mechanism is protected by being integrated within the housing and consists basically of a motor-driven lifting mechanism, a measuring pin, and the appropriate weight, which can be simply exchanged if required. This allows a single device to measure the thickness of materials acc. to different standards.


Test description
The single or multiple layer sample is placed on the measuring area. The start button is pushed and the measuring pin goes downward toward the sample at the preset speed to apply the appropriate weight to the area acc. to standard. On elapsing of a preset period the high-definition sensor measures the thickness of the sample. Then the measuring pin returns to the start position. The measurement result is displayed on the digital display and saved as statistics. The option exists of switching from single to continuous operation, where the measuring pin moves back and forth continually, allowing several consecutive measurements to be carried out.
Applicable standards
  • DIN EN ISO 534, 12625-3
  • TAPPI T411
    *more on request
Features
  • Warp-resistant housing that thanks to its stability ensures exact measurement results
  • The measuring pin and weights are exchangeable which enables the measurement of different materials with single device
Specification
  • High resolution digital sensor
  • 7" capacitive touch display
  • Cycle- and Single measurement
  • Mode for difference measurement
  • Easily adaptable access management
  • Compatible with ProbeNet
  • Available ModularLine Version
Available Models
  • S165020002 Universal Dickenmesser without measureing pin
Available Accessories
  • S165021010 Measuring pin and load mass for paper and board / DIN EN  20534 / 2cm² / 16mm
  • S165021001 Measuring pin and load mass for tissue / DIN EN  12625-3 / 10cm² / 35,7mm
  • S165021502 Measuring pin and load mass for Nonwoven / Tex / DIN EN ISO  9073 / 25cm² / 56,42mm
    and many more - see data sheet

Technical data
  • Power supply: 100-240V 50/60Hz
  • Compressed air connection: no
  • Water connection: no
Data
  • RS232 Data output
Measurement
  • Measuring range 1 - 20.000 μm
  • Measuring pin stroke 0 - 22.000 μm
  • Measuring speed 1 - 11mm/sec, 60-660 min/min
  • Sample specification length not defined / width not defined / hight max 20mm
  • Pre-pressure 51g - 10kg
  • Contact pressure - depening on measuring pin and weights 0,01 N/cm² - 40 N/cm²
  • Measuring pins 0,20cm² - 50cm² + special pins
  • Measuring accuracy ±3μm
  • Resolution 0,5μm
  • Displayed ±1μm / ±0,001mm / ±0,01 mil
  • Format μm / mm / mil (inch/1000)
  • Contact time max. 1h
  • Measuring break (Cycle) max. 60sec.
  • Difference measurement max. 72h
  • Amount of measurements per measuring series max. 99
Device Dimensions
  • S165020002 / Micrometer / 250 x 240 x 370 mm
Weight/ Version / net / gross
  • S165020002 / Micrometer / ca. 31 kg / ca. 50 kg

Privacy settings

You can adjust the settings for the cookies here.

Please select which cookies you would like to accept and confirm by clicking the button. You will then be redirected back to the start page.

*Please note that if you check the External media (Google Maps and YouTube) box, data such as your IP address bay be transmitted to Google and thus possibly to a third country without a data protection agreement. This happens especially when you use Google Maps on the site or watch our videos at the products. You can find more information here: Privacy Policy

Country representations, regarding contacts and videos are displayed only if you have checked External media.